Economic Type Ambulance

High-Quality ABS Coating and Foamboard Cabinet System Ambulances

EOS Ambulance, produced with ABS material coating and Foamboard material cabinet system, responds to your valuable requests with Economic Type ambulance conversion in accordance with the European ambulance standard EN 1789 norms.

In the Economic Type ambulance conversion, the right, left and ceiling are covered with ABS material and are located in the cabinets made of Foamboard material. Our Economic Type ambulances comply with European standards, offer ease of use and high-quality thanks to the ABS coating system and foamboard cabinets.

There is a long Light Bar at the front of the ambulance roof and a short Lightbar at the back of the ceiling.
There are side warning lamps on the upper side of the ambulance, 3 on the right and 3 on the left.
Back-area lighting with projectors
The lightbar and the siren system can be controlled from the driver’s seat.
The ambulance floor is covered with an antibacterial, non-slip and easy-to-clean material.
Under the coverings of the right and left walls of the patient cabinet, there are support plates for fixing the cabinet and medical equipment. There is also sound and heat insulation.
Both sides of the cabin have ABS covers. Chamber for an oxygen cylinder
Oxygen bottle cabinets are made of foam board and are located on the left rear side of the patient cabinet.
There is a chair stretcher cabinet and a paramedic chair on the left side of the patient’s cabin.
At the front of the cabin, there is equipment storage with drawers, a command panel cabinet, and a doctor seat.
Patient cabin ceiling and right and left walls are ABS coated.
In the patient cabinet, there is a handle and an I.V Holder along with the cabinet for the personnel.
There are 4 LED type long lamps and 2 LED type spot lamps for patient cabinet lighting.
The ambulance electrical system complies with European standards. There is an additional battery, digital control panel, inverter and rectifier.
There is an internal communication system for communication between the patient cabin and the driver’s area.
Customer-specified reflective inscriptions, stripes, and logos
Extension cable with external 220V electrical input

ECONOMIC TYPE AMBULANCE

High-Quality ABS Coating and Foamboard Cabinet System Ambulances

There is a long Light Bar at the front of the ambulance roof and a short Lightbar at the back of the ceiling.
There are side warning lamps on the upper side of the ambulance, 3 on the right and 3 on the left.
Back-area lighting with projectors
The lightbar and the siren system can be controlled from the driver’s seat.
The ambulance floor is covered with an antibacterial, non-slip and easy-to-clean material.
Under the coverings of the right and left walls of the patient cabinet, there are support plates for fixing the cabinet and medical equipment. There is also sound and heat insulation.
Both sides of the cabin have ABS covers. Chamber for an oxygen cylinder
Oxygen bottle cabinets are made of foam board and are located on the left rear side of the patient cabinet.
There is a chair stretcher cabinet and a paramedic chair on the left side of the patient’s cabin.
At the front of the cabin, there is equipment storage with drawers, a command panel cabinet, and a doctor seat.
Patient cabin ceiling and right and left walls are ABS coated.
In the patient cabinet, there is a handle and an I.V Holder along with the cabinet for the personnel.
There are 4 LED type long lamps and 2 LED type spot lamps for patient cabinet lighting.
The ambulance electrical system complies with European standards. There is an additional battery, digital control panel, inverter and rectifier.
There is an internal communication system for communication between the patient cabin and the driver’s area.
Customer-specified reflective inscriptions, stripes, and logos
Extension cable with external 220V electrical input